Using Centrex With Your
EPIC
Telephone
Centrex Operation
To set up a private Centrex line
at your telephone:
1
Connect the desired private Centrex
line to your telephone.
2
Follow the instructions on page 19
for setting up private lines.
To assign a distinctive ring to
your Centrex line:
1
Follow the instructions for assigning
distinctive rings, which are found on
page 13.
To store a Centrex code into a
memory location:
1
Follow the instructions starting on
page 45 for storing numbers into
memory dial locations.
To pick up another station’s
ringing line:
1
Dial the Centrex pickup code, or
press the memory button where you
have stored the Centrex pickup code.
2
Dial the Centrex phone number of
the ringing station.
Your
EPIC
telephone is ideal for use in a Centrex
environment.
You can easily connect a private Centrex tele-
phone number to Line 2, 3 or 4 at your phone.
The only telephone line that must be connected
to the same telephone number on all phones in
the system is Line 1.
If you wish, you may assign your Centrex line its
own distinctive ringing tone, so that you can eas-
ily differentiate calls ringing on your Centrex line
from calls ringing on the other lines, or on other
nearby phones.
You may store your Centrex codes into memory
locations and access them at the touch of a but-
ton. This is much more convenient than dialing
the appropriate Centrex feature code every time
you wish to use a Centrex feature.
You can pick up another station’s ringing line
from any other telephone.
If you have set your phone as a Centrex console,
and you are being alerted by another station that
its Centrex line is ringing, you may pick up that
line by dialing the Centrex pickup code, followed
by the Centrex telephone number of the station
sending the ring.
60
ET4300 UG for booklet old buttons v5 for PDF 021105.qxd 2/11/2005 2:56 PM Page 70
