TMB SOLARIS MOZART UV, Руководство пользователя

Страница: 4 / 11

Setup
A DMX data link is needed to run light shows of one or more fixtures using a DMX-512 lighting console. The
combined number of channels required by all of the fixtures on the DMX data link will determine the number of
fixtures the DMX data link can support.
Important: Fixtures on a DMX data link must be daisy-chained in one single line. To comply with the EIA-485
standard, no more than 32 devices should be connected on one data link. Connecting more than 32 fixtures on
one serial data link without the use of a DMX optically isolated splitter may result in deterioration of the digital
DMX signal.
Maximum recommended DMX data link distance between fixtures: 300 meters (984 ft.)
S
ETTING UP A
DMX S
ERIAL
L
INK
Do not allow contact between the common and the fixture’s chassis ground.
Grounding the common can cause a ground loop, and your fixture may perform
erratically. Test cables with an ohm meter to verify correct polarity and to make