TMB ProFan, Руководство по эксплуатации, Страница: 8 / 24

ProFan Operating Manual
8
Overhead Rigging
Recommended ProBurger rigging clamps:
1. PRBHC3/8 or PRBHC1/2 Half Couplers
2. PRBSNC1/2 Snap Coupler.
It is recommended that any structure used to support the unit can
support at least 10 times the total weight of all installed fixtures,
clamps, auxiliary equipment, etc.
1. Check that all rigging clamps are undamaged and can support
at least 10 times the weight of the unit.
2.
Clamp the fan to truss or similar support.
3.
Loosen the swivel locks and tilt the fan to the desired angle.
Turn the swivel locks clockwise to tighten. Make sure that fan,
hardware, and safety attachment are secure before applying
power.
Support Stand
A professional stand, rated to support a weight greater than the
unit, must be used to support the ProFan. TMB ProStands,
supplied with a PRXTVMP adapter, provide a reliable floor-
standing solution