TMB ProFan, Руководство по эксплуатации, Страница: 7 / 24

ProFan Operating Manual
7
Attaching the Yoke Assembly
1. Place the ProFan face down upon its front grille with the hinge
barrel side on the left and the hinge flat side on the right.
2. Place Item B3 flat washer upon the shank of Item B1 T-Handle,
followed by Item B2 thrust washer and Item B4 flat washer.
3. Place the yoke bracket into position. Insert the shank of Item
B1 T-Handle through the flat face hinge until the shank just
protrudes from the flat face.
4. Insert Item B5 aluminum bushing between the ProFan
housing’s tubular bracket and the yoke assembly hinge’s flat
face.
5. Rotate the T-Handle clockwise until the T-Handle has
threaded into the ProFan tubular housing bracket. Do not
tighten completely at this point.
6. Place Item C2 split washer onto Item C1 Allen bolt. Place the
Allen bolt through the barrel portion of the ProFan hinge and
rotate the bolt until it threads into place.
7. Tighten the Allen bolt and the T-Handle until the yoke
assembly is fixed and not easily moved.
8. At this point the ProFan is ready for mating with a stand or
clamp. Grip the fan by its tubular housing brackets when lifting
or mounting to avoid pinching hands or fingers.
B1
A1
C1
C2
B2
B3
B4
B5