Product Name: BAR Slim Rechargeable Light
Product Code: C01-2045
Installation
2.
Magnets and screws
Instructions
1.
When you set the switch on the end of the light to "ON", the light will remain
permanently on.
2.
When you set the switch on the end of the light to "OFF", the light will remain
permanently off.
3.
When you set the switch on the end of the light to 'auto' the sensor mode will
be activated. When motion is detected the light will automatically switch on.
4.
After no motion has been detected for 15 seconds the light will switch off.
5.
The sensor has a detection range of 1-3 Meters.
6.
The sensor's detection angle is 90 degrees.
7.
When the luminaire is installed in the cabinet, the sensing distance is 1-2m.
8.
When you charge the light the indicator will turn red. When fully charged the
indicator light will turn green.
1
Screw the magnetic rings provided into the
required location. If you are using the screw
magnets, please do not over tighten the screws.
2
Connect the magnets with
the light to keep it in place.
