172-65117M-04 (T5N) 6 Oct 2021
4
Checking the Piping
Use only under conditions in which no water hammer will occur. If the
glass becomes damaged, subsequent fluid discharge could result in
injury or other damage.
WARNING
Check to make sure that the piping to which the product is to be connected has been
installed properly.
1. Is the pipe diameter suitable?
2. Has sufficient space been secured for maintenance?
3. Have maintenance valves been installed at the inlet and outlet?
Specifications
As glass parts will wear and deteriorate in quality, they should be
replaced annually. If the glass becomes damaged, subsequent fluid
discharge could result in injury or other damage.
WARNING
DO NOT use this product outside the recommended operating pressure,
temperature and other specification ranges. Improper use may result in
such hazards as damage to the product or malfunctions which may
lead to serious accidents. Local regulations may restrict the use of this
product to below the conditions quoted.
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** “Valve Number” is displayed for products with options. This item is omitted from the
nameplate when there are no options.
Model
Maximum Allowable
Temperature*
Maximum Allowable
Pressure*
Nominal Diameter
Maximum Operating
Pressure
Maximum Operating
Temperature
Serial Number
Valve Number**
