6
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
DO NOT use the trap in excess of the maximum operating pressure
differential; such use could make discharge impossible (blocked).
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
Maximum Allowable
Pressure*
Model
Maximum Allowable
Temperature*
Nominal Diameter
Maximum Operating
Temperature
Maximum Differential
Pressure
Serial Number
Valve No.**
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are PRESSURE SHELL
DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** Valve No. is displayed for products with options. This item is omitted from the nameplate when there are
no options.
Configuration
172-65486MA-00 (SH5VL) 5 Sep 2012
No.
Name
M* R* F*
1 Body
2 Cover
3 Float
4 Orifice
5 Orifice
Gasket
6 Air Vent Strip (Bimetal)
7
Screw with Spring
Washer
8 Cover
Gasket
9 Cover
Bolt
10 Cover
Nut
11 Screen
12 Screen
Holder
13 Screen Holder Gasket
14 Plug
15 Plug
Gasket
16 Nameplate
17 Seal
* Replacement parts are available only in the
following kits:
M = Maintenance Kit; R = Repair Kit; F = Float
SH5VL
