172-65193A-06 (G8) 8 Jul 2015
5
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
DO NOT use this product in excess of the maximum operating pressure
differential; such use could make discharge impossible (blocked).
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate for detailed specifications.
Model
Production Lot No.
Maximum Allowable
Temperature (TMA)*
Maximum Operating
Temperature (TMO)
Nominal Diameter
Maximum Allowable
Pressure*
Maximum Operating
Pressure
Valve No.**
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
**Valve No. is displayed for products with options. This item is omitted from the nameplate
when there are no options.
Configuration
15, 20 mm
(
1
∕
2
“,
3
∕
4
“)
25 mm
(1”)
No.
Name
1
Body
2
Cover
3
Cover O-ring
4
Valve Seat Holder
5
Cover Bolt
6
Balancing Line Plug
Drain Plug
7
Snap Ring
8
Valve Seat
9
Valve Seat Holder O-ring
10 Discharge Pipe
11 Float
12 Washer
13 Y-type Strainer (Y3)
14 Nipple
15 Reducing Pipe Bushing
(only for 15, 20 mm (
1
∕
2
”,
3
∕
4
”))
16 Nameplate
