4
Specifications
Install properly and DO NOT use this product outside the recommended
operating pressure, temperature and other specification ranges.
Improper use may result in such hazards as damage to the product or
malfunctions which may lead to serious accidents. Local regulations
may restrict the use of this product to below the conditions quoted.
CAUTION
DO NOT use the product in excess of the maximum operating pressure
differential; such use could make discharge impossible (blocked).
CAUTION
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
CAUTION
Refer to the product nameplate*** for detailed specifications.
Model
Nominal Diameter
Maximum Allowable
Pressure*
Maximum Operating
Pressure
Valve No.**
Serial No.
Cv(US) or Kvs(DIN) &
Valve Characteristic
Maximum Allowable
Temperature* (TMA)
Maximum Operating
Temperature (TMO)
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** Valve No. is displayed for products with options. This item is omitted from the nameplate when
there are no options.
*** Nameplate layout depends on product specifications.
Actuator / Pneumatic Positioner
Actuator Area
120 cm
2
(18.6 in
2
)
Operation
Air-to-Open (Reverse Action)
Air Supply Connection Port
Pneumatic positioner body G
1
/
4
(with adapter for
G
1
/
4
x RC
1
/
4
, BSPT
1
/
4
or NPT
1
/
4
)
Maximum Air Supply Pressure
0.6 MPaG (85 psig)
Motive Medium
Oil-free air, filtered to 5
m
Air Consumption
At air supply pressure 0.4 MPaG: 0.16 Nm
3
/h
(55 psig: 5.65 ft
3
/h)
Electrical Input Signal/Resistance
4 to 20 mA DC / approximately 300
Electrical Connection Port
PG11
Protection Class
IP54 (dust and splash-proof type)
Allowable Ambient Temperature Range -10 to 60
C (14 to 140
F)
Material
Die cast aluminum / synthetic resin
172-65443A-01 (CV-COS) 17 Nov 2014
