manualshive.com logo in svg

TLS-BocaSystems Lemur-X, Руководство оператора

Поделиться
Скачать
TLS-BocaSystems Lemur-X Скачать руководство пользователя страница 28

 

27 

10.  Once the Test Ticket selection box comes up, click on the Send button to print out a ticket. 

 

11.  You may also print more than one ticket by changing the number of tickets you want to printer. 
 
Below are sample printouts.  Your sample printout may vary due to ticket width and length. 

 
 
 

 

Boca Systems FGL Printer Driver Modes 

 

There are adjustments that can be made to driver options available to accommodate the various ticketing systems. As described 
below, there are three modes in which the Boca Systems FGL printer drivers will operate. 
 

1. 

Spool-Uni

 

– 

Unidirectional mode

: BIDI support is OFF and Spooler is ON.  The printer monitor is turned off so no 

status is returned from the printer to the application.    In this mode the current bidirectional drivers (version 3.0.6.0) will 
operate just as the version 2.0.2.0 standard drivers released in 2010. In this mode a printer can be set up as a shared 
network and be reached from web applications. This is the default mode the configure and test program will come up in. 
 

2. 

Direct-BiDi 

– Bidirectional Direct mode

: BIDI support is ON and Spooler is OFF.  This mode is used by ticketing 

systems that want to read all status generated by the FGL printer.  With constant monitoring of the status, a ticketing 
system can always know the state of the printer before sending the next ticket.  In this mode a printer can be used local 
to the PC only. 
 

3. 

Spool-BiDi 

– Bidirectional Spool mode

: BIDI support is ON and Spooler is ON.  This is the default mode for the 

newest Boca Systems drivers come up in if no changes are made.  In this mode the spooler is used to write to the 
printer. This mode is required for applications that use a print monitor.  A printer/port monitor is used to read status back 
from the printer and maintain some of the operating systems variables contained within the PRINTER_INFO_2 & 
PRINTER_INFO_6 structures.  Ticketing systems can now read these variables to see when the printer is Ready, 
Jammed, Out of stock or Offline.  In this mode a printer can be set up as a shared network printer and reached from 
web applications.   

 
 

 

Содержание Lemur-X
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды