TKT 5 Tier Heavy Duty Chipboard Shelving, Руководство по сборке

Страница: 4 / 8

When installing the crossbars
2
,
3
, make
sure the support edge for the shelves
6
is facing up. In-
stalling the crossbars incorrectly may affect the safety
and function.
Step 2
Repeat the instructions in step 1 for the second shelving
section and place the two shelving sections next to
each other.
Now install the remaining crossbars
2
,
3
.
Wall-anchoring
Avoid injuries or death caused by the shelving
unit tipping over. Always use secure wall anchoring.
– Make sure you will not be drilling into electrical, gas or
water lines inside the wall. Use a power drill to drill the
holes into the brick wall. Always observe all safety
instructions for the power drill in the manual for the
power drill. Death or injury due to electric shock may
otherwise result.
– Mounting hardware for solid brickwalls is included.
The type of screw required varies by wall construction.
Always use screws and mounting hardware suitable for
the actual wall. The use of wrong mounting hardware may
cause the shelving unit to tip over and cause injuries or
death!
– Secure the heavy duty shelving unit to the wall using the
enclosed hardware
7
,
8
(refer to the illustration below).
9 8 7
6
6
385.80 lbs
maximum
385.80 lbs
maximum
385.80 lbs
maximum
385.80 lbs
maximum
385.80 lbs
maximum
Avoid injuries or death caused by the
shelving unit tipping over. Before loading the shelves,
make sure that all assembly and anchoring hardware
is undamaged and that the shelving unit is assembled
correctly and anchored securely in the wall. Never
exceed the maximum load of 385.80 lbs. per shelf.
Cleaning and Care
Never use fuel, solvents or corrosive cleaners.
These may damage the shelving unit.
Clean with a slightly dampened lint-free cloth.
Use a slightly damp, fluff-free cloth and a mild cleaner
for more stubborn dirt.
Disposal
The packaging is made from eco-friendly materials.
Dispose of these through your local recycling facilities and
in compliance with all federal, state and local regulations.
Please contact your municipality for information on
disposing of the shelving unit.
5 TIER HEAVY DUTY CHIPBOARD SHELVING
Assembly instructions
01 / 17
AFTER SALES SUPPORT
Model: 5 Tier Heavy Duty Chipboard Shelving
www.tkt-usa.com 305 704 3882