Corner brackets:
plastic
Maximum weight: 385.80 lbs / 175 kg per shelf
Safety Notices
KEEP ALL SAFETY MESSAGES AND INSTRUCITONS
FOR FUTURE REFERENCE!
–
Never leave children unsupervised with the
packaging material. Suffocation hazard. Keep
the shelving unit out of the reach of children. The shelving
unit is not a toy.
–
Make sure you will not be drilling into electrical, gas or
water lines inside the wall.
Death or injury due to elec-
tric shock may otherwise result!
–
Always wear safety gloves to protect hands
from cuts, pinching and bruising.
–
Verify that all assembly hardware is undamaged and
the shelving unit is assembled correctly.
–
385.80 lbs
Never exceed the maximum load of 385.80 lbs
per shelf.
Otherwise the shelving unit might
break or collapse and cause death, injuries
or damage.
–
The post with the weight limit must be installed in plain
sight (front).
Exceeding the weight limit may cause
the shelving unit to collapse or tip, resulting in
death, injuries and / or damage to the shelving unit!
–
Make sure the person assembling the shelving unit has
read the assembly instructions.
If assembled incor-
rectly, the shelving unit may collapse or tip, result-
ing in death or injuries!
–
Always set up the shelving unit on solid, level ground.
The shelving unit may otherwise tip, possibly re-
sulting in death or injuries!
–
Verify the shelving unit is sturdy before using it.
The shelving unit may otherwise collapse or tip,
possibly resulting in death or injuries!
–
Always spread the load evenly – do not overload.
The shelving unit may otherwise collapse or tip,
possibly resulting in death or injuries!
–
After assembly, verify all parts are connected firmly.
The shelving unit may otherwise collapse or tip,
possibly resulting in death or injuries!
–
Anchor the shelving unit securely to the wall!
The
shelving unit may otherwise tip, possibly resulting
in death or injuries!
–
Before anchoring, verify the wall will support the shelv-
ing unit. When in doubt, consult a licensed contractor.
The shelving unit may otherwise tip, possibly
resulting in death or injuries!
–
Wall-mounting hardware (
7
,
8
) suitable for standard
solid brickwork are included. The type of screw required
varies by wall construction. Always use screws and
mounting hardware suitable for the actual wall.
Other-
wise the shelving unit may tip potentially resulting
in death or injuries!
Assembly
The heavy duty shelving unit can be assembled vertically or
horizontally.
vertical
horizontal
Assembly and anchoring in the wall
You will need the following tools (not included):
·
Philips head screwdriver
·
Power drill
·
for brick walls: ⅜ masonry bit
·
for walls with studs (2 x 4): 1/8 wood drill bit
·
Rubber mallet
Vertical assembly
Step 1
–
Always wear safety gloves to protect hands
from cuts, pinching and bruising.
Attach corner brackets
5
to the posts
1
to
prevent scratching the floor.
Attach 2 long crossbars
2
and 2 short crossbars
3
to
the posts
1
by inserting them in the designated notches
and carefully tapping in place with a rubber mallet.
5 TIER HEAVY DUTY CHIPBOARD SHELVING
Assembly instructions
01 / 17
AFTER SALES SUPPORT
Model: 5 Tier Heavy Duty Chipboard Shelving
www.tkt-usa.com
305 704 3882
