TKS K2 CombiCutter, Руководство оператора

Страница: 15 / 64

IEF_37
C
F
D
G
E
A
B
TKS Operator's manual
15
2 Using the control box
2.1 Constituent parts – radio-
controlled remote operation
A –
Attachment handle. Can be
swung down for better viewing when th
control box is positioned on a fl at surface.
B – Screen 5.6”
C – Charging contact
D – On/Off switch
E – Grip
F – Charging cable
G – Wall plate (screws not included)
2.2 Location and connection
Mount the wall plate in an appropriate place.
The control box is not waterproof and must not
be exposed to water splash or placed in an en-
vironment with condensation. It is a good idea
to place the control box close to the machine’s
parking position or in an offi ce from where you
can see the machine. A socket for the charging
cable should be in the immediate vicinity.
2.3 Battery
The control box has a battery included.
This is maintenance-free. The battery should
be charged at all times. The battery charger
has automatic charge limits, and can always be
connected to the control box and the mains.
The feed machine runs in accordance with the
program stored in the machine’s control box.
It is a good idea to turn off the screen to save
battery power.
2.4 Screen
Turn on the screen. The start-up screen is
displayed.
The control has a touch screen. You can press
it with your fi nger or using a special pen. Only
one press at a time. Do not press too hard, as
this can damage the screen. If the screen has
not been active for a few minutes, it will enter
screen saver mode. The screen will be off in
this mode. Press any part of the screen to
reactivate it.
NB! Clean the screen using a moist cloth.
2.5 Warranty
The warranty will lapse if the control box is
opened.
Fig. 28