TKS K2 CombiCutter Скачать руководство пользователя страница 11

Страница: 11 / 64

TKS

Operator's manual

Warning-lights

Warning lights installed on the machine must be
visible from all areas of the barn

Alarm

Ensure that the installed alarm sounds
15 seconds before start (delayed start).
Do not enter the area between the Magazine
and the machine before.

Warning sign

The supplied symbolic warning signs

“No access for unauthorised persons”

be attached to all doors into the barn.

Attention! The machinery starts
automatically.

Spare parts

For safety reasons we recommend that you
only use original spare parts. The use of
third-party spares invalidates the product
guarantee.

Maintenance

Ensure that the machine is properly maintained
and is kept in good condition. Never attempt to
change the mechanical workings of the
machine.

The area in which the machine is operating

Must be physically sealed oﬀ or locked to
prevent danger to humans or animals.

Control panel

The power supply must be cut oﬀ before
opening the panel.

Emergency stop

Emergency stop switches are located at the
front and the back of the machine.
These buttons are red.

Содержание K2 CombiCutter

































































Результаты поиска

Содержание K2 CombiCutter

Отзывы:

Бренды по названию

Популярные бренды

TKS K2 CombiCutter, Руководство оператора

Результаты поиска

Содержание K2 CombiCutter

Отзывы:

Бренды по названию

Популярные бренды