TKO 9GE, Инструкция по сборке

Страница: 7 / 27

6
ASSEMBLE INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of
you. Remove all packing materials from your area and place them back into the box. Do
not dispose of the packing materials until assembly is completed. Read each step
carefully before beginning.
STEP 1
Attach the Floor Leveler (76) to the Front Stabilizer (2) and the Rear Stabilizer (3)
STEP 2
Attach the Front Stabilizer (2) and the Rear Stabilizer (3) to the Main Frame
Assembly (1) , secure it using 4 Washers (8x38x2.0t)(97), 4 Lock Washers
(M8)(90) and 4 Hex Bolts (M8xp1.25x65mm)(125) . Tighten it securely with the
socket wrench (as shown).
Adjust the Floor Leveler if the Bike is NOT leveled to the floor. Make sure the Metal
Plates are fully tightened.
Detailed Lever- drawing 1
Detailed Lever- drawing 2
Metal Plate
Stabilizer
Floor Leveler
(27)
Stabilizer
Adjustment Plate
Floor Leveler
(27)