User Manual - Network Dome - TKID45F2S - TKID85F2S - TKID45M1S - TKID85M1S
EN
24
Table 2-6
DNR parameters description
Parameter
Meaning
Configuration Method
D/N Setting Mode
It can be set to
Auto
,
Day
,
Night
or
Timing
.
z
Auto mode
The image color and filter status
are automatically switched based
on the ambient brightness. The
filter prevents infrared light from
entering the sensor in the day
state and allows all types of light
to enter the sensor in the night
state.
z
Day mode
The image is colored, and the
filter is in the day state,
preventing infrared light from
entering the sensor.
z
Night mode
The image is black and white, and
the filter is in the night state,
allowing infrared light to enter the
sensor.
z
Timing
Set day to night time and night to
day time to switch the daynight
mode.
[Setting method]
Select a value from the drop-down list.
[Default value]
Auto
TRANSI.(D-
>N)(dB)
It determines the day-to-night
switching in auto mode. When the
system gain is greater than the value
of this parameter, the system enters
the night mode.
This parameter is valid in auto mode.
The value of
TRANSI.(D->N)
must
be greater than the value of
TRANSI.(N->D)
.
[Setting method]
Drag the slider.
[Default value]
70
