User Manual - Network LPR Bullet - TKIB25M1P
EN
21
Figure 2-13
Parameter Configure
Step 2
Set
Minimum Width of License Plate
Drag the slider to set the minimum width of license plate, the setting range is 130~300
pixels.
Step 3
Set direction angle of vehicle, the range of angle is 0
e
- 360
e
.
Step 4
the figure means setting a postive direction(the picture of video is the XY
coordinate, and set car’s relative position is postive , such as the car
ÿ
position is -110
degree of picture, the range from -65
e
to - 155
e
is all postive direction . The range
from 25
e
to 115
e
is negative direction. Others is undefined diretion.
Step 5
Set
ROI area
Set an ROI area to recognize the license plate of the area.
Press and hold the left mouse button, and drag in the video area to draw a ROI area.
Step 6
Click
Apply,
the message "Apply success" is displayed.
The default license plate recognition area is full video area.
2.5.
Linkage Configure
Linkage Configure refers to configuring a linkage output when the license plate
recognized by camera.
