User Manual - Network LPR Bullet - TKIB25M1P
EN
15
2.4 Front-end Configuration
Procedure
Step 1
Move the cursor to the real-time video page and right-click on the page.
A shortcut menu is displayed, as shown in Figure 2-6.
Figure 2-6
Front-end configuration menu
Step 2
Choose
Sensor
.
The front-end configuration dialog box is displayed as shown in Figure 2-7.
Figure 2-7
Front-end configuration page
Step 3
Configure
Time Segment
.
1.
Click
in the lower left corner of Sensor Setting, and choose
Debug
Mode
.
2.
Set the
Start Time
to 18:00
3.
Set the
End Time
to 7:00
4.
Click
Save
, the message "Save succeed" is displayed.
