TZ75 Roller shutter controller
-1-
On/off knob
LED indicator
Note: This module must be"Included in the network" , and suitable forwhere it will be
permanently installed. The proper operation of this node in the mesh network is
dependent on it knowing it's location with respect to other nodes. You can not
"test bench" configure this module, then install.
The in-wall Roller Shutter Controller is designed to switch rise/lower roller shutter
connected to its terminals using radio waves, controllers and a push button directly
connected to this Roller Controller.
TM
The in-wall Roller Shutter Controller is a transceiver which is a Z-Wave enabled
TM
device and is fully compatible with any Z-Wave enabled network. Slim design let
the Controller can easily hide itself into the wall box and that will be good for the
house decoration.
The new smart relay calibration technology can reduce the inrush current caused by
the load and let the module work perfectly with many kind of Roller Shutters.This
in-wall Roller Shutter Controller is able to detect position of the Shutter by using the
patterned power measuring method, so it can be remote controlled not only fully up
Содержание TZ75
Страница 6: ......
