FITTING INSTRUCTIONS
Product:
T15 Signature Frontal Protection System
Vehicle:
Toyota HiLux (MY2020)
Part No.
070AP15N87J
For product warranty please refer to our website www.tjm.com.au
F-31649
Page 14 of 18
15/03/2021
44.
Refer to the fitting instructions provided in
the indicator/parker wiring loom kit to
connect it to the vehicle. Test operation of
the lights before proceeding.
45.
Apply the supplied parking sensor housing
sticker to the OE housing and affix to the
FPS, as shown. Ensure sensor orientation is
as per notes made from OE bumper.
Reconnect to OE loom.
46.
For vehicles without parking sensors use the
supplied parking sensor blanking plugs, use
a small amount of adheisive to aid retention
if necessary.
If a Foglight Kit has been purchased, install
it now referring to the instructions provided
in the kit. Otherwise, follow the below steps
to install the provided Foglight Blanking
Cover.
47.
Sandwich the foglight mounting bracket
between Foglight Washer Plates (2).
48.
Position the Foglight Blanking Cover as
shown opposite.
49.
Using M6 x 1.0 x 20 Hex Head Screws (4),
M6 x Ø12.5mm Flat Washers (4) and M6 x
1.0 Flange Nuts (4), secure the Foglight
Blanking Cover to the FPS.
Repeat for opposite side of FPS