FITTING INSTRUCTIONS
Product:
T15 Signature Frontal Protection System
Vehicle:
Toyota HiLux (MY2020)
Part No.
070AP15N87J
For product warranty please refer to our website www.tjm.com.au
F-31649
Page 8 of 18
15/03/2021
23.
Position the assembled outer chassis mount
on the outer face of the chassis rail aligning
the respective holes to the chassis.
24.
Slide rear inner chassis support onto bolts
and fasten loosely using M12 nyloc nuts (2)
& M12 x 32mm x 2.5mm flat washer (2).
Important:
Spacers must pass through chassis
holes and fit against the inner and
outer chassis mounts.
Repeat chassis mount steps on both
RHS.
25.
Fit the wing guard mount and loosely secure
it in place, using M12 x 1.25 x 40mm hex
screws (1), M12 spring washers (1) &
M12 x 32mm x 2.5mm flat washer (1) into
captive nut in the chassis rail.
26.
Insert 2-off M8 X 1.25 cage nuts as shown.
Repeat on RHS.
LHS SHOWN
LHS SHOWN