Tivoli Audio NetWorks +, Руководство пользователя

Страница: 16 / 24

6
b) If the “Share this folder on the network” check box is not available, your computer is not
on a network. If you would like to set up a home or small office network, click the “Network
Setup Wizard” link and follow the instructions to turn on file sharing. Once file sharing is
enabled, start this procedure over again.
8) Turn on the N, press the Source button, select Music Player mode and
“Shared folders”.
9) Select the workgroup name and then select the computer name. Now select the desired
folder and continue to select the folders you wish to access.
Note for Windows VISTA: You have to turn on the Guest account via manage user accounts
in the control panel in VISTA, then add access to either “Everyone” or “Guest” on the shared
drive. You can create a new account for the N with a password if you are concerned
about security. The Guest account has no password by default, so the N will
connect to it from its factory default settings.
Operating Shared Folders (CIFS) after Set-Up:
) Select the Music Player mode under Source in the N and select “Shared Folders”.
2) N will search for all available domains and show all found domains. This may take a
minute or so.
3) Once you select a domain, a list of PCs on the domain is displayed.
4) Select the PC you wish to access.
) Once a Domain and PC have been chosen, a list of all of the shared folders in the system will
be displayed.
6) Select a folder and a file to play within the folder.
As with the USB input, the Music Player cannot play back protected music files that use Apple’s
proprietary coding. Songs or albums purchased through iTunes use this format. If any music files
are in the Real Audio format, they should be converted to MP3 format for playback through the
N.
DAB mode:
Station List: Shows all available DAB stations. Use the
pq
buttons to highlight a specific station
and the Select button to tune that station.
Local Scan: Searches only for local DAB stations.
Full Scan: Searches the entire DAB frequency range. This scan takes longer to complete than the
Local Scan. If you move the N to another location, you must perform a new Full Scan so
the radio will find the stations in the new location.
Manual Tune: Press the pq buttons to manually tune specific DAB frequencies, then press
Select to tune the displayed frequency.
DRC: Dynamic Range Control allows you change the sound level of stations to make quiet
passages louder to compensate for a noisy environment or when listening at a low volume level.
The options are:
DRC 0: Off.
DRC Low: ½ of transmitted signal.
DRC High: As transmitted.