TitanTec HT340-1, Руководство пользователя, Страница: 8 / 16

■
BEFORE STARTING THE ENGINE
1. The area within a perimeter of 50 feet (15m) of the person using
the product should be considered a hazardous area into which no
one should enter. If necessary, yellow warning rope, warning signs
should be placed around the perimeter of the area. When work is
to be performed simultaneously by two or more persons, care
should also be taken to constantly look around or otherwise check
for the presence and locations of other people working so as to
maintain a distance between each person sufficient to ensure
safety.
2. Check the condition of working area to avoid any accident by
hitting hidden obstacles such as stumps, stones, cans, or broken
grass.
IMPORTANT
Remove any obstacle before beginning work.
■
STARTING THE ENGINE
1. Keep bystanders and animals at least 50feet (15m) away from
the operating point. If you are approached, immediately stop the
engine.
2. The product is equipped with a centrifugal clutch mechanism, so
the cutting attachment begins to rotate as soon as the engine is
started by putting the throttle into the start position. When starting
the engine, place the product onto the ground in a flat clear area
and hold it firmly in place so as to ensure that neither the cutting
part nor the throttle come into contact with any obstacle when the
engine starts.
WARNING
Never place the throttle into the high speed position when
starting the engine.
3. After starting the engine, check to make sure that the cutting
attachment stops rotating when the throttle is moved fully back to
its original position. If it continues to rotate even after the throttle
has been moved fully back, turn off the engine and take the unit to
your authorized servicing dealer for repair.