TitanTec HT340-1, Руководство пользователя, Страница: 13 / 16

1. Pull the unlock button out and hold it in its
position
2.
Turn the handle in desired direction to the end.
Make sure the handle engages in position.
•
Do not press the throttle during this operation!
■
Hedge Trimming Techniques
•
Trimmer sides of a hedge first, and then
the top.
•
Adjust the handle so that it fits the intended
cut and start the product as described.
•
Cut and remove branches exceeding the
cutting capacity (max. 27 mm) of this product
using a proper pruner before operation.
•
Move the cutting blade lightly through the
cutting surface in a sweeping motion
following the shape of the hedge or shrub. A
slight tilt downwards of the cutting blade in
the direction of motion is recommended for
optimum cutting performance.
•
Do not to rush and do not attempt to cut
too much with one stroke of the cutting blade.
•
First cut both sides from the bottom cutting
upwards to the top. This will prevent any of
the cuttings falling into the path of the area
still to be cut
•
Cut in a number of stages if the area is
particularly long to achieve a better result;
smaller cuttings will allow for easy
composting.
WARNING
•
Always follow the safety precautions.
•
The hedge-trimmer must only be used to trim
hedges or small bushes. It is forbidden to cut
other types of material. Do not use the
hedge-trimmer as a lever to lift, move or break
objects, nor lock it on fixed supports.
•
It is forbidden to apply tools or applications
that are not the ones indicated by the
manufacturer onto the hedge-trimmer’s power
take-off. Do not use it for pruning trees or
cutting grass.
•
Use only as much throttle as is needed to do
the job. Excessive engine speed is unnecessary.
•
Avoid cutting thick branches, for which will
damage the blades and shorten the life of drive
systems.
•
Tilting the trimmer 5 to 10° to the cutting
object will make the job easy and bring a good
result.
•
Always keep your body to the carburetor side
of your trimmer, never on the muffler side.