TitanTec HT340-1, Руководство пользователя, Страница: 10 / 16

■
TRANSPORTATION
1. When hand-carrying the product, cover over the cutting part if
necessary, lift up the product and carry it paying attention to the
blade.
2. Never transport the product over rough roads over long
distances by vehicle without removing all fuel from the fuel tank. If
doing so, fuel might leak from the tank during transport.
■ HANDLING FUEL
1. The engine of the product is designed to run on a mixed fuel
which contains highly flammable gasoline. Never store cans of fuel
or refill the tank of the unit in any place where there is a boiler,
stove, wood fire, electrical sparks, welding sparks, or any other
source of heat or fire which might ignite the fuel.
2. Never smoke while operating the unit or refilling its fuel tank.
3. When refilling the tank, always turn off the engine and allow it to
cool down. Take a careful look around to make sure that there are
no sparks or open flames anywhere nearby before refueling.
4. Wipe spilled fuel completely using a dry rag if any fuel spillage
occurs during refueling.
5. After refueling, screw the fuel cap back tightly onto the fuel tank
and then carry the unit to a spot 10feet (3m) or more away from
where it was refueled before turning on the engine.