TitanNetworx TNDS-9000P, Инструкция по установке

Страница: 8 / 15

3
2.4 Product Installation
Desktop Installation
Step 1: Set the bottom of the switch up on a flat and stable desktop;
Step 2: Paste four cushions in the corresponding concave places at the bottom;
Step 3: Turn over the switch and place it face up on the workbench.
Figure 2-1 Desktop Installation
Magnet Installation
Step 1: Attract 4 magnets into the corresponding round grooves on the bottom at
each corner of the switch’s housing;
Step 2: Use screws to secure the magnets to the switch’s housing, shown as
Figure 2-2 (a);
Step 3: Press the switch (installed with magnets) in a proper way on a stable
surface you select, shown as Figure 2-2 (b). When installing, be careful with your
fingers.
Figure 2-2 Magnet Installation
Note:
l Select the installation surface carefully. If the surface is not proper, the
reliability of this installation will be influenced.
l Too high installation position or vibration might cause a fall leading to