TitanNetworx TNDS-9000P, Инструкция по установке

Страница: 11 / 15

6
2. Not allowed to bury grounding bar.
If not allowed to bury the grounding bar, you can directly connect the switch to the
grounding bar through the power cord. Ensure that the provided adapter you use
has a 3-core and protective grounding cable, and the power cord in the switchgear
room or beside the AC power supply transformer is well-grounded.
Figure 2-6 Install with the grounded power cord
Chapter 3 Hardware Connection
Connection Procedures & Check
Step 1: Use an Ethernet cable to connect one upstream network device (such as
another switch or a router) to the Uplink port on the switch, shown as Figure 3-1.
Figure 3-1 Connect an upstream network device
Step 2: Use other Ethernet cables to connect downstream network devices to the
Downlink ports. PoE-capable ports can access PDs such as an AP, an IP phone,