Titanium HomeOffice PL 250, Руководство по эксплуатации

Страница: 29 / 64

29
Burn hazard! The laminator will become hot during
operation.
− Always let the laminator cool off completely before you
clean it.
Risk of short circuit!
Water that has penetrated the housing may cause a
short circuit.
− Never submerge the laminator in water.
− Make sure that no water penetrates the housing.
Risk of damage!
Improper handling of the laminator may result in da-
mage to the laminator.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles, sharp or metallic cleaning utensils such as
knives, metal sponges and the like. They could damage the
surfaces.
− Do not in any case place the laminator in the dishwasher.
It would be destroyed as a result.
1. Disconnect the mains plug before cleaning.
2. Let the laminator cool off completely.
3. Use a damp cloth to wipe off the laminator. Let all parts dry completely afterwards.
Cleaning the heating rollers
1. Switch the laminator on by moving the ON/OFF switch
2
to “ON” (–).
2. Once the ready indicator 1 turns red, fold a sheet of paper and insert it, foldededge
first, into the laminating pouch infeed slot 3 .
3. Keep repeating this process until no more glue deposits cling to the paper.
4. Switch the laminator off by moving the ON/OFF switch
2
to “OFF” (O).
8. Cleaning
29