Titanium HomeOffice PL 250, Руководство по эксплуатации

Страница: 27 / 64

27
case, do not use the laminator. Contact the manufacturer at the service address
specified on the warranty card.
3. Check to make sure that the delivery is complete.
Setting up the laminator
1. Position the laminator so that there is enough space to insert a laminating
pouch. Do not position the laminator directly in front of a wall or other objects.
2. Connect the mains plug to a properly installed socket with a protective conductor
(230 V = house connection).
Activating / deactivating the laminator
1. Move the ON/OFF switch
2
to “ON” (–) to switch the laminator on.
The ready indicator 1 will turn from dark blue to red once thelaminator has
reached the correct temperature for lamination. The preheating time may vary
depending on the ambient temperature and air humidity.
2. Move the ON/OFF switch
2
to “OFF” (O) to switch the laminator off.
7. Operation
Risk of injury!
Handling the laminator improperly may result in injury.
− If an object (sleeves, tie etc.) is unintentionally taken into the
laminating pouch infeed slot, immediately disconnect the
mains plug. Risk of damage!
Improper handling of the laminator may lead to dama-
ge to the laminator or documents.
− Do not in any case laminate documents with a treated
surface (e.g. fax or thermopaper, Polaroid pictures etc.) and
papers with surfaces that may be altered through heat
(tickets, ultrasonic scans etc.).
27