EN
In more detail...
30
30
TTI880RSP
General cutting
Fit the saw blade (13) according to the intended application.
Hold the product with one hand on the main handle (6) and with
the other hand on the gripping surface (3). (Fig. 10)
Switch the product on and wait until it runs at full speed before
placing it on the workpiece.
Place the guide plate (1) flat on the workpiece and move the
product at an even speed.
WARNING!
Always ensure the guide plate lays flat on
the workpiece during operation! Do not try to make cuts
with the product only held by hand!
10
12
11
13
Operation
