TTB669PRW
by TITAN
Operation
Getting
started...
EN
35
In
more
detail...
EN
> Caution! Increase the distance from the cleaning area for softer woods.
Cement patios, stone, and brick
> Rinse at high pressure using fan spray in a sweeping motion keeping the
nozzle at least 7-15 cm from the cleaning surface.
> Maintain a further distance from the cleaning area when using jet spray.
Cars, boats, and motorcycles
> Clean one side at a time to achieve the best results.
> Rinse at high pressure using fan spray in a sweeping motion keeping the
nozzle at least 20 cm from the cleaning surface. Maintain a further distance
from the cleaning area when using jet spray.
> Wipe surface dry for a polished finish.
> Do not clean the engine with this product!
After use
> Release the trigger (2d) and lock it.
> Turn the on/off switch (7) to its off position “
OFF/O
”.
> Turn off the water tap.
> Unlock and press the trigger (2d) to release the pressure still present in the
product.
WARNING!
Only separate the high-pressure hose from the spray gun
and the water hose from the product when no more pressure exists in
the system! Also ensure that the product is turned off and separated
from electrical supply!
> Lock the trigger (2d).
> Disconnect the product from the power supply.
> Separate the water hose from the water supply and then from the water hose
connector (22).
> Wind the pressure hose (8) and place it onto the pressure hose holder (3).
Ensure that the hose is not bent or twisted but winded up evenly.
> Dismantle the accessories in the reverse sequence of the assembly
instructions if you are not going to use this product for a long period of time.
> Check, clean and store the product as described below.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 35
8/18/15 4:16 PM
