TTB669PRW
by TITAN
Before you start
Getting
started...
EN
17
NOTE:
The water hose connector (22) is supplied with an insulating
washer (22a).
The water hose connector (22) contains a filter (22b) to protect the
product against larger particles. Ensure that this is fixed appropriately.
Do not use the water hose connector without a washer and filter.
Pressure hose
> Push the hose release (2b) and hold
it in position (Fig. 4, step 1).
> Insert the connector of the pressure
hose (8) into the hose connection
port (2c) of the spray gun (2). Ensure
it snaps in place (Fig. 4, step 2).
> Release the hose release (2b)
afterwards.
2.
1.
2b
2c
8
Fig. 4
> Remove the cap (6a) from the water outlet (6) (Fig. 5, step 1).
> Screw the pressure hose locking sleeve (8) to the water outlet (6). Make sure
the connection is properly tightened (Fig. 5, step 2).
8a
6a
6
6
1.
2.
Fig. 5
Accessories
A choice of accessories is supplied in the scope of the delivery of this product.
Please check the technical specification of any accessories that you purchase to
ensure they are compatible with this product.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 17
8/18/15 4:16 PM
