![Titan TTB669PRW Скачать руководство пользователя страница 26](http://html1.mh-extra.com/html/titan/ttb669prw/ttb669prw_manual_1119543026.webp)
TTB669PRW
by TITAN
Before you start
EN
Getting
started...
26
Connection to water supply
WARNING!
Although this product is suitable for attachment to the
drinking water supply local regulations may prohibit the connection to
drinking water connections!
Observe the regulations of your local utility company when connecting
the product to a water supply line! If it is prohibited to connect to
the drinking water facility, you must use a backflow preventer which
corresponds to EN 12729 Type BA or EN 61770! Make sure that the
hose is at least a diameter of 12.7 mm (1/2”) and is reinforced!
> Attach a suitable water hose (not
included) to the water supply and
the other end to the water hose
connector (22) (Fig. 29).
Ø
12,7 mm
22
Fig. 29
NOTE:
The water hose connector (22) is supplied with an insulating
washer (22a).
The water hose connector (22) contains a filter (22b) to protect the
product against larger particles. Ensure that this is fixed appropriately.
Do not use the water hose connector without a washer and filter.
Connection to power supply
> Make sure the on/off switch (7) is in its off position “
OFF/O
”.
> Connect the plug with a suitable socket.
WARNING!
Check the voltage! The voltage must comply with the
information on the rating label!
If using an extension cord it must be suitable for outdoor use with
sockets protected against water splashing. Ensure the extension cord
is of the proper size and type for your product (≥ 1.5 mm²)!
Always use a residual current device (RCD) protected supply.
> Your product is now ready to be used.
MNL_TTB669PRW_TIT_GB_V03_150818.indd 26
8/18/15 4:16 PM