09
TTB517STP
by TITAN
Getting
started...
GB
Technical and legal
information
SAFETY INSTRUCTIONS FOR NAILER/STAPLER
Secure the workpiece
(a workpiece clamped with clamping devices or in
a vice is held more securely than by hand).
Never push in the nailer/stapler head manually
(there is danger of injury
when at the same time the trigger is activated unintentionally).
Never use the tool for fastening electrical wiring
(contact with electrical
wires can lead to fire and electric shock)
Avoid damage that can be caused by screws, nails and other elements in
your workpiece; remove them before you start working.
Always check that the supply voltage is the same as the voltage indicated
on the nameplate of the nailer/stapler (nailers/staplers with a rating of
230V or 240V can also be connected to a 220V supply).
In case of electrical or mechanical malfunction, immediately switch off the
tool or unplug charger from power source.
We can assure flawless functioning of the tool only when original accessories
are used.
This tool should not be used by people under the age of 16 years.
Do not expose tool to rain.
>
>
>
IE
>
>
>
>
>
>
>
>
>
>
Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool.
Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
power tools operation. If damaged, have the power tool repaired before
use.
Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc., in accordance with
these instructions and in the manner intended for the particular type of
power tool, taking into account the working conditions and the work to
be performed.
Use of the power tool for operations different from those
intended could result in a hazardous situation.
5) SERVICE
>
Have your power tool serviced by a qualified repair person using only
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
