background image

200W MULTI-CUTTER 

TTB507HTL

GUARANTEE

This                   product carries a guarantee of 24 months. If your product develops a 

fault within this period, you should, in the first instance contact the retailer where the 

item was purchased.

This guarantee specifically excludes losses caused due to:

- Fair wear and tear

- Misuse or abuse

- Lack of routine maintenance

- Failure of consumable items (such as batteries)

- Accidental dammage

- Cosmetic damage

- Failure to follow manufacturer’s guidelines

- Loss of use of the goods

This guarantee does not affect your statutory rights. This guarantee is only valid in the

UK.

For any enquiries relating to the guarantee please refer to your retailer.

Congratulations on your purchase of a               . Power tool from 

Titan Power Tools (UK) Ltd. We want you to continue getting the best 

performance from it so this handbook includes information on safety, 

handling and care. Please retain this handbook in case you need to refer to 

any of the information in the future.

Your               power tool comes with a 24-month guarantee, so should it 

develop a fault within this period contact your retailer.

Содержание TTB507HTL



















Отзывы: