Titan TTB507HTL, Инструкция по безопасности и эксплуатации

Страница: 16 / 18

ENVIRONMENTAL PROTECTION
This product has been marked with a symbol
relating to removing electric and electronic
waste. This means that this product shall not
be discarded with household waste but that it shall
be returned to a collection system which conforms
to the European Directive 2002/96/CE. It will then
be recycled or dismantled in order to reduce the
impact on the environment. Electric and electronic
equipment can be hazardous for the environment
and for human health since they contain hazardous
substances. For further information visit www.
recyclemore.co.uk
UK PLUG REPLACEMENT
The fuse in the main plug of your power tool should
always be replaced with one of identical rating.
Check the voltage given on your power tool matches
the supply voltage.
The power tool is supplied with a fitted plug,
however if you should need to fit a new plug follows
the instruction below.
IMPORTANT
The wire in the mains lead are coloured in ccordance
with the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured blue must be connected
to the terminal that is marked with the letter N. The
wire that is coloured brown must be connected to the
terminal that is marked with the letter L.
A 13AMP (BS1363 or BS1363/A) plug must be used
and a 13 AMP fuse must be fitted.
13 AMP
FUSE
BROWN
L (LIVE)
CABLE GRIP
OUTER
SLEEVE
BLUE
N (NEUTRAL)