BREAKER 1700W TTB280DRH
UK PLUG REPLACEMENT
The fuse in the main plug of your tool should always be
replaced with one of identical rating.
Check the voltage given on your tool matches the supply
voltage.
The tool is supplied with a fitted plug, however if you should
need to fit a new plug follows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in accordance
with the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured
blue
must be connected to
the terminal that is marked with the letter
N.
The wire
that is coloured
brown
must be connected to the
terminal that is marked with the letter
L.
A 13 AMP (BS1363 or BS1363/A) plug must be used and
a 13 AMP fuse must be fitted.
13 AMP
FUSE
BROWN
L (LIVE)
CABLE GRIP
OUTER
SLEEVE
BLUE
N (NEUTRAL)
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice. For further
information visit www.recyclemore.co.uk
MARTEAU-DEMOLISSEUR ELECTRIQUE 1700W TTB280DRH
MARTEAU-DEMOLISSEUR ELECTRIQUE 1700W TTB280DRH
