background image

ADDITIONAL  SAFETY  INSTRUCTIONS  FOR  YOUR  ANGLE 

GRINDER

1. If the supply cord is damaged have it replaced by a qualified person.

2. Check that speed marked on the wheel is equal to or greater than the rated speed of 

the grinder.

3. Ensure that the wheel dimensions are compatible with the grinder.

4.  Abrasive  wheels  shall  be  stored  and  handled  with  care  in  accordance  with 

manufacturer’s instructions.

5.  Inspect  the  grinder  wheel  before  use.  Do  not  use  chipped,  cracked  or  otherwise 

defective products?

6.  Ensure  that  mounted  wheels/discs  and  parts  are  fitted  in  accordance  with  the 

manufacturer’s instructions.

7. Ensure that the abrasive product is correctly mounted and tightened before use and 

run the tool at no-load for 30 seconds in a safe position. Stop immediately if there is 

considerable vibration or if other defects are detected. If this condition occurs, check the 

machine to determine the cause.

8. If a guard is supplied with the tool never use the tool without such a guard.

9.  Do  not  use  separate  reducing  bushings  or  adapters  to  adapt  large  hole  abrasive 

wheels.

10. For tools intended to be fitted with a threaded hole, ensure that the thread in the 

wheel is long enough to accept the spindle length.

11. Check that the work piece is properly supported.

12. Do not use cut off wheel for side grinding.

13. Ensure that sparks resulting from use do not create a hazard e.g. do not hit persons, 

or ignite flammable substances.

14. Ensure that ventilation openings are kept clear when working in dusty conditions. 

If it should become necessary to clear dust, first disconnect the tool from the mains 

supply (use non metallic objects) and avoid damaging internal parts. 

15. For cleaning, always use eye and ear protection. Other personal protective equipment 

such as dust mask. gloves, helmet and apron should be worn.

16. The wheel continues to rotate after the tool is switched off.

17. Always check walls to avoid hidden power cables and pipes . 

18. Do not touch the workpiece immediately after grinding as it will be very hot.

19. Do not hold unsecured work in your hand.

20. Do not use the grinder as a fixed tool.

21. Do not try to cool the grinding disc with water.

22. Always use the appropriate safety equipment that is required for the product. e.g. 

Goggles / Safety Spectacles, Ear defenders (essential with tools with a noise rating of 

over 85 dbA), Gloves and face masks. In all cases ensure that the safety equipment is 

in good condition.

23.Ensure that if a side handle or stabilising handle is provided with the 

power tool then these are adjusted into a comfortable position and that both handles 

are used to securely grip the power tool when in use.

Double insulation: 

 

The tool is double insulated. This means that all the external metal parts are electrically 

insulated  from  the  mains  power  supply. This  is  done  by  placing  insulation  barriers 

Содержание SF115XP

















Отзывы: