background image

 

 

Introduction  

Thank you for choosing Titan Gas-Powered Post Drivers. The performance of this tool is dependent 
upon your knowledge of the information contained in this operator’s manual and your understanding of 
the operation and care of the engine installed on your Titan Post Driver.   

This post driver is powered by a Honda GX35 engine. Honda supplies its own operator’s manual, which 
covers all aspects of operating and maintaining your Honda engine. The Honda manual is provided to 
you along with this Titan Post 

Drivers operator’s manual. Keep both manuals with your machine for 

reference by all operators.  Follow all recommended maintenance for both the Titan Post Driver and the 
Honda engine.   

Your Titan Post Driver comes with a one-year parts warranty (see the 

Warranty

 section of this manual). 

We suggest that you read the warranty information and fully understand its coverage and your 
responsibilities of ownership. To register your Titan Post Driver, go to 

https://www.titanpostdrivers.com/warranty-registration/

 and fill out the warranty registration form.  

The Honda warranty is separate from the Titan Post Drivers warranty and is subject to its own 
coverage conditions and responsibilities of ownership. You can find the Honda warranty included with 
your Honda operator’s manual.  

Please contact Titan Post Drivers at (702) 293-4262 for parts or technical questions related to your 
post driver warranty. Please contact your local Honda service dealer for parts or technical questions 
related to your engine.  

 

Titan PGD2000 

with 2” Barrel

                         

Titan PGD3200 

with 3 1/4” Barrel

 

Содержание PGD2000

























Отзывы: