background image

© Titan Tool Inc.  All rights reserved. 

3

Important Safety Information

 · 

Read all safety information before 

operating the equipment.  SavE ThESE INSTRucTIONS.

haZaRD:  EXPLOSION haZaRD DuE TO 

INcOMPaTIBLE MaTERIaLS 

Will cause property damage or severe injury.

PREvENTION:

  •  Do not use materials containing bleach or chlorine.

  •  Do not use halogenated hydrocarbon solvents such 

as bleach, mildewcide, methylene chloride and 1,1,1 - 

trichloroethane.  They are not compatible with aluminum.

  •   Contact your coating supplier about the compatibility of 

material with aluminum.  

haZaRD:  GENERaL 

Can cause severe injury or property damage.

PREvENTION:

  •  Read all instructions and safety precautions before 

operating equipment.

  •  Follow all appropriate local, state, and national codes 

governing ventilation, fire prevention, and operation. 

  •  The United States Government Safety Standards have 

been adopted under the Occupational Safety and Health 

Act (OSHA).  These standards, particularly part 1910 of 

the General Standards and part 1926 of the Construction 

Standards should be consulted.

  •  Use only manufacturer authorized parts.  User assumes 

all risks and liabilities when using parts that do not meet 

the minimum specifications and safety requirements of the 

pump manufacturer.

  •  All hoses, fittings, and filter parts must be secured before 

operating spray pump.  Unsecured parts can eject at great 

force or leak a high pressure fluid stream causing severe 

injury.

  •  Before each use, check all hoses for cuts, leaks, abrasion 

or bulging of cover.  Check for damage or movement of 

couplings. Immediately replace the hose if any of these 

conditions exist.  Never repair a paint hose. Replace it with 

another grounded high-pressure hose.

  •  Do not kink or over-bend the hose. Airless hose can 

develop leaks from wear, kinking and abuse.  A leak can 

inject material into the skin.  

  •  Do not expose the hose to temperatures or pressures in 

excess of those specified by manufacturer.

  •  Do not spray outdoors on windy days.

  •  Wear clothing to keep paint off skin and hair.

  •  Do not operate or spray near children.  Keep children 

away from the equipment at all times.

  •  Do not overreach or stand on an unstable support.  Keep 

effective footing and balance at all times.

  •  Use lowest possible pressure to flush equipment.

  •  Stay alert and watch what you are doing.

  •  Do not operate the unit when fatigued or under the 

influence of drugs or alcohol.

  •  For electric units — Always unplug cord from outlet before 

working on equipment.

  •  Do not use the hose as a strength member to pull or lift the 

equipment.

  •  Do not lift by cart handle when loading or unloading.

Gasoline Engine Safety

The engine exhaust from this unit contains 

chemicals known to the State of california to cause 

cancer, birth defects, or other reproductive harm.

  •  Gas engines are designed to give safe and dependable 

service if operated according to instructions.  Read and 

understand the engine Owner’s Manual before operating 

the engine.  Failure to do so could result in personal injury 

or equipment damage.

  •  To prevent fire hazards and to provide adequate 

ventilation, keep the engine at least 1 meter (3 feet) away 

from buildings and other equipment during operation.  Do 

not place flammable objects close to the engine.

  •  Children and pets must be kept away from the area of 

operation due to a possibility of burns from hot engine 

components or injury from any equipment the engine may 

be used to operate. 

  •  Know how to stop the engine quickly, and understand the 

operation of all controls.  Never permit anyone to operate 

the engine without proper instructions. 

  •  Gasoline is extremely flammable and is explosive under 

certain conditions. 

  •  Refuel in a well-ventilated area with the engine stopped.  

Do not smoke or allow flames or sparks in the refueling 

area or where gasoline is stored. 

  •  Do not overfill the fuel tank.  After refueling, make sure the 

tank cap is closed properly and securely. 

  •  Be careful not to spill fuel when refueling.  Fuel vapor or 

spilled fuel may ignite.  If any fuel is spilled, make sure the 

area is dry before starting the engine. 

  •  Never run the engine in an enclosed or confined area.  

Exhaust contains poisonous carbon monoxide gas; 

exposure may cause loss of consciousness and may lead 

to death. 

  •  The muffler becomes very hot during operation and 

remains hot for a while after stopping the engine.  Be 

careful not to touch the muffler while it is hot.  To avoid 

severe burns or fire hazards, let the engine cool before 

transporting it or storing it indoors. 

  •  Never ship/transport unit with gasoline in the tank.

Specifications

Gallons per minute (GPM)

 ........

2.2 (8.33 LPM)

Maximum tip size

 ...................... one gun = 0.049”

 

two guns = 0.035”

 

three guns = 0.027”

 

four guns = 0.023”

Maximum pressure ...................

3300 PSI (22.8 MPa)

Power

 .......................................

7.0 HP gas engine

Weight

 ......................................

164 lbs. (74.4 kg)

Maximum hose length ..............

300’ (91.4 m)

Содержание Advantage GPX 220





























Отзывы: