Accessories
Airless Tip Selection
Tips are selected by the orifice size and fan width. The proper
selection is determined by the fan width required for a specific
job and by the orifice size that will supply the desired amount
of fluid and accomplish proper atomization.
For light viscosity fluids, smaller orifice tips generally are
desired. For heavier viscosity materials, larger orifice tips are
preferred. Please refer to the chart below.
The following chart indicates the most common sizes and the
appropriate materials to be sprayed.
Fan widths measuring 8" to 12" (20 to 30 cm) are most
preferred because they offer more control while spraying and
are less likely to plug.
Liquid Shield
Cleans and protects spray systems
against rust, corrosion and
premature wear.
Part No.
Description
700-888 ...........Case of 12
(1 quart bottles)
700-889 ...........1 Quart
Piston Lube
Specially formulated to prevent materials
from adhering to the piston rod, which
becomes abrasive to the upper seals.
Piston Lube will break down any material
that may accumulate in the wet cup and
keep it from drying.
Part No.
Description
700-925 ...........8 Ounce Individual
700-926 ...........1 Quart Individual
700-911 ...........Case of 12
(8 ounce bottles)
700-912 ...........Case of 12
(1 quart bottles)
Tip Size
Spray Material
Filter Type
.011 — .013 Laquers and stains
100 mesh filter
.015 — .019 Oil and latex
60 mesh filter
.021 — .023 Heavy bodied latex
30 mesh filter
NOTE: Do not exceed the pump's recommended tip
size.
© Titan Tool Inc. All rights reserved.
9
