manualshive.com logo in svg

Titan 5059340256061, Руководство пользователя

Поделиться
Скачать
Titan 5059340256061 Скачать руководство пользователя страница 48

48

TT5MTP26-2

In

 more 

detail

 . . .

Pole pruner use

Angle adjustment

Adjust the attachment angle to suit working conditions.

1.  Press the locking lever (C10) down with one hand (Fig. 38).

38

C10

2.  Hold the clutch cover (C11) with the other hand and turn until the desired angle is 

adjusted (Fig. 39). Then angle can be adjusted from 0° to +90°.

39

C11

Kickback

WARNING!

 Beware of kickback! Kickback can lead to dangerous loss of 

control of the machine and result in serious or fatal injury to the operator or 

anyone standing close by! Always be alert because rotational kickback and 

pinch kickback are major machine operational dangers and the leading cause 

of most accidents!

 

> Kickback is the sudden backward/upward motion of the machine, occurring when 

the chain (at the tip of the chain bar) comes in contact with a log or wood, or when 

the chain becomes jammed.

Operation

Содержание 5059340256061
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды