47
TT5MTP26-2
In
more
detail
. . .
> Hold the cutting attachment just above the ground at an angle of approximately 30
°
(Fig. 35).
> Move the machine with slow and regular motion from left to right before moving it
back to the starting position and trimming the next area (Fig. 36).
35
36
30
°
> Ensure that the cutting attachment remains clean
and free of off-cuts to avoid jamming. Make sure the
stop switch (A11) is set to
STOP
and the spark plug
connector (A3) is removed before checking the cutting
attachment for defects.
> Avoid cutting wet grass as it tends to stick to the moving
parts.
> Pay special attention when performing the work close
to trees and bushes (Fig. 37).
37
Operation
