Titan 191441, Руководство пользователя

Страница: 5 / 20

5
from the Tractor, then wait five minutes before performing any maintenance procedure or inspection
on the Trimmer.
●
Be mindful of hazards, changes in terrain, slopes, or wet conditions. Use care when backing up.
● Stop the cutting cords when crossing gravel drives, walks, or roads.
●
Never, under any conditions, remove, bend, cut, fit, weld, or otherwise alter standard parts on the 3PT
Trimmer. This includes all shields and guards. Modifications to your machine could cause personal
injuries and property damage and will void your warranty.
●
If the cutting cords strike a foreign object or if your machine should start making an unusual noise or
vibration, disengage PTO, shut down the Tractor Engine, remove the key, wait for all moving parts to
come to a complete stop, disconnect the PTO shaft from the Tractor, then wait five minutes before
inspection. Vibration is generally a sign of trouble. Clean and repair and/or replace damaged parts.
●
While using the 3PT Trimmer, do not hurry or take things for granted. When in doubt about the
equipment or your surroundings, stop the machine and take the time to look things over. Make sure
that you have 100% control of the Trimmer at all times.
●
Watch for traffic when mowing near roadways.
● Use the machine only in daylight.
●
Be cautious when using your 3PT Trimmer around fencing, wires, ropes, and hoses. It is possible that
these and other debris can become wound around the Cord Head of the machine, potentially damaging
the bearings or injuring you.
●
Do not operate the 3pT Trimmer on slopes greater than is recommended in you Tractor manual.
● Keep all nuts and bolts tight and keep the equipment in good operating condition.
A Note to All Users
No list of warnings and cautions can be all-inclusive. If situations occur that are not covered by this manual,
the operator must apply common sense and operate this 3PT Trimmer in a safe manner.