Titan 191441, Руководство пользователя, Страница: 13 / 20

13
WARNING
● This machine is designed to operate at 540 rpm PTO shaft speed only! Never operate at a faster speed;
doing so can cause serious injury to the operator or bystanders and could cause damage to the
machine that is not covered under warranty.
● Read and understand your tractor owner’s manual and all tractor safety warnings for operating your
tractor safety before operating this 3-Point Hitch Trimmer/Mower.
Operation Notes
●
See the Owner’s manual that came with your tractor for all safety warnings and detailed information
for operating your tractor properly.
●
Always operate the tractor PTO at 540 RPM when trimming.
● Always disengage the PTO, lock the parking brake and shut off the tractor when leaving the tractor
seat.
●
Never transport the trimmer while the PTO is turning.
● Do not have the trimmer engaged or resting on the ground when backing up. The machine is designed
to trim and roll on the wheel in the forward direction only, Trimming or rolling on the wheel in the reverse
direction could damage the machine and is not covered by the warranty.
●
Remove any debris buildup from the machine before every use of the trimmer.
●
Always install the locking bolt and wing nut into the transport holes of the 3-Point bracket and trimmer
when transporting the trimmer.
Setting Wheel Height
1. Remove the Hitch clip and remove the wheel assembly with spacers.
2. Adjust the spacers as desired with some under and some above the support on the shaft.
3. Reinstall wheel assembly, spacers and hitch clip.
Note: More spacers under the support will lower the wheel and set the trimmer head higher. More spacers
on top of the support will raise the wheel and set the trimmer head lower.
Hitch Clip
Spacers
Support
Wheel Assembly
Operation Instructions