Titan 155FLAIL, Руководство оператора

Страница: 11 / 24

11
TRANSPORTING
NOTE: Always disengage PTO before raising mower to transport position.
1. When raising the mower to transport position, ensure that the driveline does not contact
the tractor or mower. Adjust and set tractor drawbar height so the driveline does not
reach the mower deck in the fully raised position.
2. Be sure to reduce tractor ground speed when turning, leaving enough clearance so that
the mower does not contact obstacles such as buildings, trees, or fences.
3. Select a safe ground travel speed when transporting from one area to another. When
traveling on roadways, transport in such a way that faster moving vehicles may pass
safely.
4. When traveling over rough or hilly terrain, shift the tractor to a lower gear.
CAUTION
When traveling on public roads, whether at night or during the day, use accessory lights and
devices for adequate warning to operators of other vehicles. Comply with all Federal, State, and
Local laws.
MOWING INSTRUCTIONS
1. Clear area to be mowed of objects and debris that might be picked up and thrown by the
mower blades.
2. Grass is best cut when it is dry. Mowing wet grass can cause plugging resulting in grass
clumps behind the mower.
3. Grass should be mowed frequently as shorter clippings deteriorate faster.
4. If mowing extremely tall grass, it is best to raise cutting height and mow the area, then
lower cutting height and mow a second time at the desired height.
OPERATING INSTRUCTIONS
Proper servicing and adjustments are the keys to the long life of any machine. With the careful
and systematic inspection of the mower, users can avoid the cost of maintenance, time, and
repair.
Before beginning to mow, the user should perform the following inspection:
1. Check oil level in gearbox.
2. Check that all plugs in the gearbox are properly replaced and tightened.
3. Be sure all mower blades, bolts, and nuts are tight.
4. Be certain all guards and shields are in place and secure.
5. Grease driveline shaft and all other grease fittings.
6. Clear area to be mowed of rocks, branches, and other foreign objects.
7. Lower mower to ground. Set tractor throttle at approximately ¼ open. Engage PTO to
start blades rotating.
8. Operate with 540 rpm PTO tractor.
9. At first begin mowing at a slow forward speed and shift up until the desired speed is
achieved maintaining 540 rpm PTO