Titan Pro TP 700, Руководство по эксплуатации

Страница: 14 / 22

13
DEPTH
DEPTH
DEPTH DEPTH REGULATOR
REGULATOR
REGULATOR REGULATOR LEVER
LEVER
LEVER LEVER
Tilling depth is controlled by the height of
the depth regulator lever. To adjust tilling depth :
1
．
Remove detent pin.
2
．
Raise the depth regulator lever to position
tines at chosen tilling depth.
3
．
Align hole in depth regulator lever with hole
in depth regulator bracket and replece detent pin .
Depth Depth Depth Depth Regulator Regulator Regulator Regulator Lever Lever Lever Lever Down Down Down Down = = = = Shallower Shallower Shallower Shallower tilling tilling tilling tilling ....
Place the detent pin in the top hole of the depth regulator lever for shallowest tilling.
Depth Depth Depth Depth Regulator Regulator Regulator Regulator lever lever lever lever Up Up Up Up = = = = Deeper Deeper Deeper Deeper tilling. tilling. tilling. tilling.
Place the detent pin in the bottom hole of the depth regulator lever for deepest tilling.
BELT BELT BELT BELT TENSION TENSION TENSION TENSION ADJUSTMENT ADJUSTMENT ADJUSTMENT ADJUSTMENT
Proper belt tension is critical to good performance . After 1/2 hour of operation . All cables
may have to be adjusted due to initial stretch. There after, check tension after every 2 hours
of operation.
To To To To increase increase increase increase belt belt belt belt tension tension tension tension ::::
1. Loosen upper jam nut. Turn nut up cable in 1/8'' increments.
2. Tighten lower jam nut.
3. Check adjustment .
This procedure can be repeated until conduit adjustment bolts are fully adjusted . If no more
adjustment can be , belt may have to be replaced.