background image

PO Box 7069 Greenwood, IN 46142

1.888.908-4826     FAX (317) 215.2770

www.titanlifts.com

TITAN MARKETING, LLC

®

To Our Valued Customers:

Thank you for purchasing a Titan Lifts

®

 product. We hope this high quality equipment provides you with years of 

dependable service.

It is unfortunate that rare situations may occur with the products you purchase from Titan Lifts

®

. We value your 

business as well as the trust you have and need to maintain your relationship with us. Titan Lifts

®

 carries liability 

coverage that may protect our customers if a situation does occur. However, as in all accidents there must be 

proof of liability for a claim to be made. Our insurance company requires the following procedures be observed in 

order to consider a claim:

 

A. The claimant must contact the Titan Lifts

®

 distributor immediately with the facts of the situation.

 

B. If any equipment is damaged, including vehicles or shop equipment, Titan Lifts

®

 must be given the  

opportunity to send an impartial representative to the site for proper assessment of the situation. 

 

C. The Vehicle cannot be moved until either an impartial representative has reviewed the accident or clear 

and precise pictures are taken that reflect all the pertinent information for an impartial representative to be able 

to access the information from a distance. Titan Lifts

®

 or its representatives must approve the pictures before 

anything can be moved. 

 

D. If any potential liability is determined on behalf of Titan Lifts

®

, two estimates must be submitted for 

damages to be reimbursed. 

It is imperative that the claimant complies with these procedures, because without proper assessment of the 

situation a claim will be denied. 

ARBITRATION NOTICE

The installation or use of this equipment shall constitute an acknowledgment that the user agrees to resolve any 

and all disputes or claims of any kind whatsoever, which relate in any way to the equipment, by way of binding 

arbitration, not litigation. No suit or legal action may be filed in any state or federal court. Any arbitration shall be 

governed by the Federal Arbitration Act, and administered by the American Mediation Association, Indianapolis 

Indiana. The maximum amount that an arbitrator may award and all damages shall not exceed the retail value of 

this equipment. 

WARRANTY NOTICE

This equipment must be assembled and used in the manner according to the documentation provided to be 

covered by warranty. 

Damaged or missing components must be reported within 72 hours of receipt to your freight carrier and to the 

distributor. Claims must be filed to cover cost.

If you have any questions or if we can be of any further assistance, please don’t hesitate to contact a Titan Lifts® 

representative at 1-888-908-4826. Thank you for the opportunity to continue to serve your lift equipment needs. 

Содержание PREMIER HD2P-9KFP









































Отзывы: