6
ASSEMBLY INSTRUCTIONS
STEP 3
1.
Attach
GUIDE ROD FIXED PLATE (13)
to
BOTTOM CROSS BASE (3)
using
M10*95MM
BOLT (37), M10 WASHER (44),
and
M10 NYLON LOCKNUT (46).
2.
Insert the
ROD (21 CM) (25)
through the hole of the
BOTTOM CROSS BASE (3)
using
M10*50MM BOLT (40).
Then attach
LIMIT RING (26)
to the ends of the
21CM ROD (25)
using
M6 SCREW (42).
STEP 4
1.
Insert
WEIGHT SELECTOR (22)
into the hole of the
TOP WEIGHT PLATE (21)
using the
PIN (23).
2.
Put the
RUBBER BUMPER (33), WEIGHT (20)
(No.30)
on the
GUIDE ROD FIXED PLATE (13)
and
insert one end of the
GUIDE ROD (35)
into the
HOLE (21mm).
3.
Next, slide the
WEIGHT PLATES (20)
down the
GUIDERODS (13)
in this order
a.
28PC WEIGHT PLATES (20) (No.29-2)
and the
TOP
WEIGHT PLATE (21) (No.1).
