4
IMPORTANT:
Set switch on digital control board to
‘SHORT DELAY’
(5 second
flip) or
‘LONG DELAY’
(5 minute flip) prior to activating Medusa™ controller.
‘LONG DELAY’
flip is designed for use with ceramic lighting systems
.
It is recommended to inspect & tighten power connections
every 90 days.
Troubleshooting Tips
If the Medusa™ is not performing as expected, try the following:
a.
Using a voltage test meter confirm that the power input
is active from your electrical panel and providing 240
Volts/ 30 Amps/ 60 Hz. to the controller.
b.
Make sure all connections are tight. Loose connections
can cause “arcing” and harm the controller.
c.
Using a test meter, confirm that the power output is
240V AC from lighting outputs.
d.
Should you find that your circuit breaker keeps tripping,
check your panel breaker to verify that it is the correct
amperage for the circuit load.
e.
Still having problems with the Titan Controls
®
Medusa™
- Four to Eight Light Digital Flipping Controller? Please
contact our Technical Service Representative at 888-
808-4826 to assist you further.
Controller Specifications
•
Size = 21” H x 16” W x 3.75” D
•
Weight = 15 lbs.
•
Voltage Input = 240V AC
•
Voltage Output = 240V AC
•
Maximum Input Amperage = 30 Amps
•
Maximum Output Amperage = 20 Amps
•
Hertz = 60 Hz.
•
Storage Temperature = 32° F (0° C) to 135° F (57° C)
•
Operating Temperature = 40° F (5° C) to 125° F (52° C)
Warranty Information
•
Titan Controls
®
warrants the original purchase of this products
against defects in materials or workmanship under normal use for
three (3) years from the date of purchase.
•
During the warranty period, Titan Controls
®
will, at our option, and
